1. A set of lampblack suckers and cookers should not adhere to the side wall as far as possible to prevent the edge of the cooker from clashing with the wall.
2. On the wall side of the cabinet, we must consider the outburst of the door line to prevent the opening and closing of doors, drawers and basket from being affected.
3. There should be enough space between the sink and the cooker. It is better to use more than 800, but it should not be too far to make the running between the sink and the cooker.
4. Pay attention to the fair allocation of accessories, of course, cabinet accessories are various, but the fittings suitable for each kitchen are different. It is convenient to use and functional.
5. The joint of the corner of the table must have a fair area scale to prevent the impact of the force from causing fracture.
6. Pay attention to the reserved position of the socket. The socket between the table and the hanger should be different from the direction of the sink. The socket of the refrigerator should be set on the side of the main wall or the upper side, as well as the kitchen treasures. Microwave Oven. Range hood. Sterilizer. Oven, etc.
7. The position of the upper and lower water outlets should be no less than 400 mm. It is convenient to connect the faucet and kitchen treasures. The height of the sewer should not be more than 100 mm or less than 200 mm, so that when installing cabinets, the dynamic sawing of cabinet body should be reduced to the minimum. Because the bottom of the cabinet has adjusting feet, the orientation of the bottom is generally between 100 mm and 140 mm.
8. The rectification of gas pipeline needs to be in harmony with the gas company. It is better to make the gas outlet pipeline and the intake pipe side by side, and try to reduce the area of the guaranteeing board of the pipeline on the countertop, so as to expand the area of the countertop and do the rectification of the gas pipeline well in advance so as to facilitate the opening dredging of the cabinet.
9. There are two ways to arrange the pipe of smoke machine: first, before laying brick ceiling, it is better to place the pipe of smoke machine in the inside of the ceiling and seal the edge, calculate the orientation of the exit of the smoke machine, and second, arrange it in the lower part of the ceiling, after the hanging cabinet device is finished, cover it with the top plate. The condition of this way is that the distance between the vent outlet and the main wall should not exceed 300 mm.